Book a call
Book a call

Is Your Galaxy Watch Slowing You Down? Two Watches, One Skate

Thanks to Eric R. for wearing two Galaxy Watches - a Galaxy Watch9 and a Galaxy Watch5 Pro - one on each wrist, during a November 19, 2026 pickup hockey skate in the Rochester, New York, area. His two HPT recordings give us a side-by-side look at how the watches measured the same player on the same ice.

What the watches recorded

Both watches ran the same HPT Wear OS build and used the same indoor speed calibration. Their recordings overlapped for 1 hour, 20 minutes and 35 seconds. Their Top Speed estimates were about half a mile per hour apart. The Watch5 Pro estimated 17% more skating distance.

What HPT recordedGalaxy Watch9Galaxy Watch5 ProWatch5 Pro DifferenceParity (10%)
Shifts after joining continuation segments101110.0% higherYes
Detected shift time52 min 46 sec56 min 4 sec6.3% higherYes
Estimated skating distance3.96 mi4.63 mi17.0% higherNo
Average skating speed4.60 mph5.02 mph9.1% higherYes
Top Speed17.67 mph18.21 mph3.0% higherYes
Peak Speed over 2 seconds15.08 mph16.00 mph6.1% higherYes
Peak Speed over 3 seconds13.30 mph15.31 mph15.1% higherNo
Whole-session average heart rate120 bpm116 bpm3.3% lowerYes
Time the watch reported heart rate available99.97%43.13%56.9% lowerNo
Estimated calories776 kcal551 kcal28.9% lowerNo

Parity means the Watch5 Pro reading was within 10% of the Watch9 reading for this skate.

Why the shift counts and distances differed

The watches agreed on 50 minutes and 10 seconds of detected shift time. After we joined continuation segments, the Watch5 Pro had 11 shifts and the Watch9 had 10. The extra Watch5 Pro shift lasted about 21 seconds and had no overlap with a Watch9 shift. Most of the difference in total shift time came from how the watches timed the shifts they both picked up.

Two things added up to the 17.0% distance gap. The Watch5 Pro recorded 6.3% more time in shifts and estimated about 10.1% more distance per second of detected shift time. It logged more distance per second in all 10 matched shift groups. Around 7:41 a.m., both watches recorded about four and a half minutes. The Watch9 estimated 572 metres and the Watch5 Pro estimated 643 metres.

Why the speed metrics disagreed by different amounts

Average skating speed reflects the skating each watch counted, so differences in both the shift boundaries and the speed readings can move that average. Top Speed and the two held peaks answer different questions. The Top Speed figures were only 3.0% apart, and each watch recorded its highest Top Speed during a different shift. Peak Speed over two or three seconds asks how fast the watch recorded Eric skating over the full window. The gap grew from 6.1% over two seconds to 15.1% over three seconds. The longer window makes the result more sensitive to how long the watch recorded a high speed.

Why the calorie estimates diverged

The Watch5 Pro estimated 28.9% fewer calories even though it recorded more shift time and distance. Both watches used the same heart-rate-based calorie model. The watches delivered different heart-rate readings and different amounts of usable data, so the calorie model had different inputs for the same skate.

The heart-rate averages were closer than the individual readings

The workout averages were just 4 bpm apart. We also paired 709 heart-rate readings taken within two seconds of each other. Those readings differed by 13.4 bpm on average, and about half of the pairs differed by at least 10 bpm. The Watch9 read 5.5 bpm higher on average across those pairs.

Why the watch’s heart-rate signal matters

When two HPT summaries disagree, it’s easy to assume the app got the numbers wrong. Each summary starts with the sensor data its watch supplies. The Galaxy Watch5 Pro reported that it was still acquiring heart rate for 56.76% of the session, or about 57%. HPT’s diagnostics counted 2,847 accepted heart-rate samples on the Watch5 Pro and 4,835 on the Watch9. Wear OS sensor availability.

HPT uses heart rate alongside movement to help identify shift starts and ends. A rise in heart rate can confirm that skating has started, and a drop as movement slows can help identify a shift end. With fewer fresh readings, HPT has fewer chances to check those transitions against heart rate. On the Watch5 Pro, HPT confirmed 16 shift entries using skating motion when fresh heart-rate data was unavailable. The Watch9 confirmed 14 entries using heart rate and logged zero uses of that fallback.

Where a shift starts and ends affects which acceleration bursts count toward HPT’s explosiveness metrics. Those boundaries also affect estimated shift time and skating distance. Heart rate feeds the calorie estimate directly, so differences in the readings matter when comparing the calorie totals.

Watch hardware matters

Eric’s side-by-side skate lines up with what we’ve seen in HPT team testing. Newer watch hardware has generally delivered heart-rate readings more consistently in our tests. A steadier signal gives HPT more data to work with when it checks the start and end of a shift.

Battery condition matters on the ice, too. Rechargeable watch batteries lose capacity with age and repeated charging. An older watch with a well-used battery can have less runtime for a long skate or back-to-back games. Samsung’s guide to battery health.

Eric wore a different model on each wrist, and the watches used different sensor sampling modes. Independent measurements would be needed to tell which readings were closer to his actual speed, distance and heart rate.

Track how your numbers change from skate to skate

Newer watches generally gave us steadier heart-rate readings in testing. To measure your improvement, the most useful comparison is how your numbers change across similar sessions. A single skate captures one day. A series of comparable skates helps you see whether a change holds over time.

Compare your two-second Peak Speed across several pickups, or compare average speed when you repeat the same skating drill. Using the same watch and wearing it the same way gives you a more consistent baseline. If you switch watches, build a fresh baseline before comparing trends.

Track your own skate

HPT tracks shifts, speed and heart rate on supported watches. Explore the HPT watch app and see how automatic shift tracking works.

Ready to Track Your Hockey Performance?

Start tracking 35 documented metrics with HPT

Download on the App StoreGet it on Google Play See plans
Get the app